The claystone siltstone samples obtained from the Dhok Pathan Formation of the SiwalikGroup at proposed Kalabagh Dam Site were thoroughly investigated to find out their index values. The concerned data have been collected from the previous studies through the boreholes, drillholes and trenches excavated for investigations. For frequency of jointing, the data were limited to outcrops and trenches only. The Dhok Pathan Formation (alternate sandstones and claystones) exposed in the area of study has been divided into different beds in their stratigraphic order. These are designated negative numbers for silt stone/claystone and positive numbers for alternate’s sandstone beds. The maximum exploration depth in the area is upto bed 9, while data upto bed-7 has been analysed and presented. The claystone/siltstone beds between two sandstone beds are given numbers by the reference sign as prefix. Beds 3 to 9 are exposed on the left bank, while beds 1 to 4 are exposed on the right bank of the Indus River. The graphical correlation presentation of index values could be utilized for the quick assessment of the strength characteristics of the materials occurring at different horizons. The study also reveals that the angle of residual friction decreases with increase in clay fraction and claystones exhibit greater intensity or frequency of jointing with higher index values.