No Detail Found!

Mitigation of seismic pounding between adjacent buildings.

Author(s)
A. Hameed Department of Civil Engineering, UET, Lahore Pakistan
M. Saleem Department of Civil Engineering, UET, Lahore Pakistan
A. U. Qazi Department of Civil Engineering, UET, Lahore Pakistan
S. Saeed Department of Civil Engineering, UET, Lahore, Pakistan
M. A. Bashir Department of Civil Engineering, UET, Lahore Pakistan
Abstract
Adjacent buildings during an earthquake may collide against each other when, owing to their different dynamic characteristics, the buildings vibrate out of phase and the at-rest separation distance is inadequate to accommodate their relative motions. Seismic pounding can cause severe damage to the structures. Such buildings are usually separated by an expansion joint which is insufficient to accommodate the lateral movements of buildings under earthquakes. While seismic pounding can be prevented by providing adequate safe code specified separation distances, sometimes getting of required safe separations is not possible in metropolitan areas because buildings are built very close to each other due to high land value, limited availability of land space, the need for centralized facilities under one roof and/or often ignoring the likelihood of seismic pounding between adjacent buildings during design. If building separations in metropolitan areas found to be deficient to prevent pounding, then there should be some secure and cost-effective retrofitting methods to mitigate structural pounding. This research work covers the mitigation techniques of pounding between adjacent buildings due to earthquakes. Use of shear wall, bracing system and friction dampers are proposed as possible mitigation techniques.
Publication Details
Page(s) 326-333
DOI DOI not available
Published Journal: Pakistan Journal of Science, Volume: 64, Issue: 4, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

50

Views