No Detail Found!

De-bonding model and sensitivity analysis for deformational response of anchor bars.

Author(s)
M. Saleem Department of Civil EngineeringUniversity of Engineering and Technology, Lahore, Pakistan
T. Tsubaki Department of Civil Engineering, Yokohama National University, Yokohama, Japan
A. Hameed Department of Civil EngineeringUniversity of Engineering and Technology, Lahore, Pakistan
A. U. Qazi Department of Civil EngineeringUniversity of Engineering and Technology, Lahore, Pakistan
Abstract
The effect of the interface properties such as stiffness and the strength on the pull-out behavior of a post-installed anchor bar is investigated using a multi-layer analytical model in this study. The anchor bar is such that used in the concrete jacketing method to strengthen reinforced concrete bridge piers. The mechanical properties of the infill layer are different from the surrounding concrete. Therefore the existing pull-out model of deformed bars cannot be applied directly in this case. By the sensitivity analysis the effect of these parameters is clarified on the load-displacement curve, shear stress distribution, de-bonded length and the damage of the surrounding concrete. Then the optimum combination of these parameters is investigated. From the above analysis, it is confirmed that the elastic modulus of the interface should be large to reduce the pull-out displacement and the increase of the shear strength of the interface makes the pull-out load larger.
Publication Details
Page(s) 273-281
DOI DOI not available
Published Journal: Pakistan Journal of Science, Volume: 64, Issue: 4, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

50

Views