Describes Performance of plunging jet aerator operating as a continuous biological reactor using the liquid. Running of plunging jet reactor as a continuous system posed practical problem such as foaming, which was finally controlled by separating foaming (aeration) and deforming (non-aeration) processes. Under optimum aeration condition, it is possible that the dissolved oxygen concentration would be zero. Thus the effect of both zero dissolved oxygen concentration and its duration on the micro organisms should be considered while deciding on oxygen transfer rates and defoaming time. Short durations (a few minutes) have no significant effect on microbial pupulation. In this work dissolved oxygen concentration fell to zero during defoaming at 28 hours retention time. But for 10 days retention time, the dissolved oxygen concentration was never zero during defoaming, rather it was usually near saturation.