Iron, chromium, nickel, cobalt are important alloying elements in steels and are also present as impurities in many non-ferrous alloys. It is observed that for atomic absorption analysis use of a proper dissolving reagent is essential otherwise concentration of chromium cannot be determined quantitatively due to its interference with the chromium. It is concluded that dissolving reagent nitric acid in air-acetylene flame causes major reduction in Cr-concentration whereas hydrochloric acid has no adverse effect. Sulphate, nitrate and chloride of Iron, nickel and cobalt were added in chromium to study the effect of chemical interferences. It was confirmed by X-ray diffraction studies that in all cases besides other compounds chromium oxide is also formed which does not decompose in air-acetylene flame resulting a decrease in chromium concentration depending upon Its quantity. Additions of copper and zinc do not cause any interference or reduction in Cr-concentration. It was also observed that nitrous oxideocetylene or carbon rod atomisation results no depression in Cr-concentration.