No Detail Found!

Some physical and strength properties of plywood manufactured from Nigerian grown timbers.

Author(s)
Loryisa Verinumbe Lake Chad Research Institute, Maidujuri, Nigeria
Abstract
Tests were conducted on five sheets of plywood made from Nigerian grown species, to determine some physical and mechanical properties. The plywood contains 3 piles: 1 rrm thick Antiaries africano facings and 4 rrm thick Terminalia superba as core. Static binding strength, impact strength, density, moisture content, and glue bond quality were determined as specified in B.S. 4512 (1969) and B. S. 1445 (1972). Modulus of rupture (MOR), modulus of elasticity (MOE), impact strength, density, moisture content and glue bond quality of samples from each of 5 boards were determined. The mean value for MOR was 47.38 N/mm2 and 31.76 N/mm2 perpendicular and parallel to grain of face veneer respectively. MOE parallel to grain was 19209.44 N/rrm2 and MOE perpendicular to grain was 3498.2? N/mm2. Mean density and moisture content as received was 597.65 kg/m3 and 9.84% respectively. At the testing conditions of 65% relative humidity and 20 C, mean density was 589.85 kg/m while moisture content was 8.37%. These properties suggest high strength acquisition by structures made of the plywood. Except for the between board glue bond quality, there was no significant variation between the ply-woods tested (p>0.05).
Publication Details
Page(s) 3-6
DOI DOI not available
Published Journal: Pakistan Journal of Forestry, Volume: 35, Issue: 1, Year: 1985

Request the full text from PASTIC

0

Citations

0

Downloads

40

Views