The sandwich panels consisting of glass fibre reinforced high alumina cement skins and light weight core of expanded polystyrene were manufactured by a hand layup method. The panels were assembled to form a slab by using a shear connector in between the panels. The behaviour of the slab so formed was determined experimentally by testing it is bending. Theoretical prediction of deflections at centre and at quarter points was made by two way-one by assuming the slab as an Isotropic Plate and the other by assuming the slabes as Shear Connected Orthotropic Beams. The comparison of the theoretical and experimental results shows that the behaviour of the floor slab made of an assemblage of sandwich panels is in between the two cases considered for the theoretical study. The comparison gives a fair idea that the deflections in such slabs can be predicted by assuming the behaviour as the mean of Isotropic Plate and Shear Connected Beams.