The principal iron mineral in the Chitral ore is magnetic (Fe303) however there is a small association of secondary iron mineral phases. The gangue minerals are quartz, calcite, chlorite, epidote pyrite etc. The ore contains about 59.4% and 9.9% SiO2The ore is hard and the grinding characteristics are such that quite a significant amount of the ore remains coarse (.01 mm) while the remaining reduces to fine particle size on ball milling. There is very little material corres-ponding to intermediate size fractions. Silica in the ore is uniformly distributed in the matrix (except for some silica veins) and the liberation (80%) of the iron minerals can be achieved around 150 micron size. Magnetic separation of the ore yields a product containing 68.6% Fe and 3.3% Si02. Corresponding to a recovery of 84% Fe and 17% SiO2 in the concentrate.Total impurities level was reduced to 4.7%.