The effect of three crease - recovery reagents, dimethylolethyleneurea, dimethylolethyleneurea formaldehyde and carbamate reactant with two catalysts magnesium chloride and zinc nitrate, on yarn and cloth made from AC134 cotton were studied. Crease-recovery reagents without catalysts have very little effect on strength of cellulosic material. They, however, cause reduction in strength when used alongwith catalysts, but catalysts alone do not reduce strength. The reduction in strength is, thus due to the interaction of crease-recovery reagents with cellulose and not by the acid degradation. There is almost a linear relationship between increase recovery angle and loss in strength of fabrics. Premercerization plays an important role in preservation of strength. Maximum increase in strength and elongation was observed when the yarn was treated at original length with caustic soda of 50-60 Tw. Softeners (2240) have no appreciable effect in preservation of tensile strength.