No Detail Found!

Peeling properties of Morus alba wood species.

Author(s)
M. Yasin
Qaim Hussain Shah
Abstract
A preliminary study was carried out to determine properties of mulberry wood. Effects of knife angle, log conditioning period and veneer drying temperature and time on the quality of veneer were studies. It was observed that mulberry logs produce good quality veneer of 1.0 mm, 2.0 mm, and 2.5 mm thickness, when they were conditioned in hot water for 12 to 18 hours before peeling. Knife angle of 92% was found to be optimum for cutting good quality veneer from logs of 1.0 to 1.5 feet diameter. Drying of the veneer was observed to be somewhat patchy and therefore, difficult to control. However, 1.0 mm, 2.0 mm and 2.5 mm thick veneers were dried at 90° C for 60 minutes without development of defects. The results of this study would be useful to the plywood industry in the country, which uses mulberry wood in the manufacture of commercial plywood.
Publication Details
Page(s) 171-196
DOI DOI not available
Published Journal: Pakistan Journal of Forestry, Volume: 25, Issue: 3, Year: 1975

Request the full text from PASTIC

0

Citations

0

Downloads

35

Views