A simple procedure has been developed for the simultaneous determination of copper and manganese using non-destructive neutron activation analysis technique. The specimen to be analyzed was irradiated for an appropriate time with thermal neutrons at a flux of 2x1013n.cm-z.sec-1. Various factors such as the irradiation time, the radioactive decay and interference from other radionuclide’s were studied and optimized. For quantitative determination the α-ray spectra of the radionuclide’s were measured with a 3"x3" Nal(TI) detector coupled with a computerized multichannel analyzer. The areas under the 845 KeV photo peak of Mn56 and 511 KeV annihilation radiation peak of Cu64 were determined and the amounts of these elements were calculated using the comparator method. The results were crosschecked with destructive activation analysis. This procedure was applied for the determination of these elements in certain IAEA and U.S.NBS Standard Reference Materials (SRM) and in certain copper bearing ores.