Describes on experimental study of the characteristics of frost formed on a cryosurface (a plate at liquid nitrogen temperature) by mass transfer from a controlled environment (temp. 36F to 118F specific humidity 15 to 476 grains of moisture per pound of dry air). Tests were conducted on both horizontal and vertical positions of the plate to determine total heat transfer rate, surface temperature mass and thickness, thermal conductivity and density of frost. It was found that in transient period frost thermal conductivity decreased to a minimum value and then increased and that it was dependant upon average temperature of frost. Energy transport was through the frost layer not by means of simple conduction but by some other means like internal diffusion of water vapour within frost layer.