No Detail Found!

Tensile, compressive and thermal properties of Epoxy / hollow glass beads/ Graphene ternary foamed composites.

Author(s)
Xiang-Feng Wu School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Yong-Ke Zhao School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Ze-Hua Zhao School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Yang Sun School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Yun Zhang School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Sen-Sen Zheng School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Feng Juan Xiao School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering materials, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R. China
Abstract
Hollow glass beads and graphene were used to improve the performances of the epoxy resin. The density, tensile, compressive properties and thermal behaviors of the as-prepared samples were discussed. Experiment results showed that hollow glass beads could effectively reduce the density of the epoxy resin matrix. When the hollow glass beads loading was 30 wt%, the density of the composites was 0.81 g·cm-3. Moreover, graphene could enhance the mechanical performances of the foamed composites. When the graphene loading was 0.75 wt%, the tensile strength, Young’s modulus and strain break of the epoxy/hollow glass beads/graphene ternary samples were 85.2 %, 53.4 % and 11.0 % more than the control binary sample, respectively. Moreover, the compressive strength and modulus were 10.8 % and 68.6 % more than the control binary sample, respectively. In addition, DSC and TG results showed that graphene could accelerate the curing and improve the thermal stability of the foamed composites.
Publication Details
Page(s) 28-32
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 38, Issue: 1, Year: 2016

Request the full text from PASTIC

0

Citations

0

Downloads

74

Views