No Detail Found!

Mechanical characterization of recycled aggregate concrete.

Author(s)
M. Rizwan Riaz Civil Engineering Department, University of Engineering and Technology, Lahore, Pakistan
Rashid Hameed Civil Engineering Department, University of Engineering and Technology, Lahore, Pakistan
Muhammad Ilyas Civil Engineering Department, University of Engineering and Technology, Lahore, Pakistan
Affifa Akram Civil Engineering Department, University of Engineering and Technology, Lahore, Pakistan
Zahid A. Siddiqi Civil Engineering Department, University of Engineering and Technology, Lahore, Pakistan
Abstract
 Experimental study was carried out to investigate the mechanical properties of recycled aggregate concrete prepared with recycled aggregates obtained from local precast concrete industry and the findings of this study are presented in this paper. Five different concrete mixtures were prepared: one control mixture containing only natural aggregates and four mixtures of recycled aggregate concrete (RAC) containing natural and recycled aggregates at 25%, 50%, 75% and 100% replacement levels of natural aggregates. The results of mechanical tests such as compressive strength, modulus of elasticity, Load versus CMOD response, fracture energy in tension and compression are presented. The results indicate that at 25% replacement level, mechanical properties of RAC are almost similar to that of control concrete mix, however, mechanical properties of RAC are degraded when natural aggregates are replaced with recycled aggregates at replacement level greater than 25% and degradation is increased with the increase of replacement level
Publication Details
Page(s) 25-32
DOI DOI not available
Published Journal: Pakistan Journal of Engineering and Applied Sciences, Volume: 16, Issue: 1, Year: 2015

Request the full text from PASTIC

0

Citations

0

Downloads

66

Views