No Detail Found!

Optimization of wastewater treatment process in industry “A case study of Hattar Industrial Estate Haripur”.

Author(s)
Rahib Hussain National Centre of Excellence in Geology, University of Peshawar;Department of Environmental Sciences, University of Peshawar, Pakistan
Waqas Ahmad Department of Environmental Sciences, University of Peshawar, Pakistan
Muhammad Nafees Department of Environmental Sciences, University of Peshawar, Pakistan
Ayed Hussain Urdu University of Arts, Science and Technology, University of Karachi, Pakistan
Abstract
This study was conducted with the objectives to analyze Ghee Mill effluents, search out low cost wastewater treatment and make the water suitable for irrigation. For this purpose Ghee Mill effluents were analyzed for 19 physico-chemical parameters twice, before and after treatment and were compared with Pakistan National Environmental Quality Standards (Pak-NEQS). The analytical results revealed that Total Suspended Solids (TSS), Chemical Oxygen Demand (COD) and oil & grease were high. For identification of suitable treatment method, two different techniques were tested, coagulation and adsorption. The optimum dose of 35mg/L to 66 mg/L was identified as appropriate to remove suspended solids. For adsorption a column containing 0.2 mg/L was identified as suitable dose for removal of color and COD. The analytical results after treatments were complying with Pak-NEQS. Therefore, coagulation in combination with adsorption is herein recommended for treatment of Ghee Mill effluents.
Publication Details
Page(s) 28-34
DOI DOI not available
Published Journal: Pakistan Journal of Analytical & Environmental Chemistry, Volume: 15, Issue: 1, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

62

Views