No Detail Found!

Mechanical characterization of cotton fiber/polyester composite material.

Author(s)
Altaf Hussain Rajpar Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, Pakistan
Abdul Latif Maganhar Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, Pakistan
Sadiq Ali Shah Department of Mechanical Engineering, Mehran University of Engineering & Technology, Shaheed Zulfiqar Ali Bhutto campus, Khairpur Mirs, Pakistan
Abstract
Development of composite from natural fiber for lower structural application is growing for long-term sustainable perspective. Cotton fiber composite material has the added advantages of high specific strength, corrosion resistance, low cost and low weight compared to glass fiber on the expense of internal components of IC engines. The primary aim of the research study is to examine the effect of the cotton fiber on mechanical properties of lower structural applications when added with the polyester resin. In this paper composite material sample has been prepared by hand Lay-Up process. A mould is locally developed in the laboratory for test sample preparation. Initially samples of polyester resin with appropriate ratio of the hardener were developed and tested. At the second stage yarns of cotton fiber were mixed with the polyester resin and sample specimens were developed and tested. Relative effect of the cotton as reinforcing agent was examined and observed that developed composite specimen possess significant improvement in mechanical properties such as tensile strength was improved as 19.78 % and modulus of elasticity was increased up to 24.81%. Through this research it was also observed that developed composite material was of ductile nature and its density decreases up to 2.6%. Results from this study were compared with relevant available advanced composite materials and found improved mechanical properties of developed composite material.
Publication Details
Page(s) 227-236
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 33, Issue: 2, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

52

Views