No Detail Found!

Impact of trifling quantity of polyester on physical characterization of low twist rotor spun blended yarn.

Author(s)
Farooq Ahmed Department of Textile Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abdul Waqar Rajput University college of Textile Engineering and Technology, Bahauddin Zakariya University, Multan, Pakistan
Abdul Razaque Sahito Department of Mechanical Engineering, Mehran University of Engineering and Technology, Jamshoro, Pakistan
Sidra Saleemi Department of Textile Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abstract
This study was planned to investigate the influence of small share of polyester fiber on properties of low twist rotor spun yarn especially yarn strength. Cotton/polyester blended yarns were prepared by Reiter R-40 with three different linear densities at low twist of 550 tpm. Two cotton polyester blend ratios i.e. (982) and (955) were investigated at all linear densities. Encouraging results were obtained with slight addition of polyester fiber with respect to yarn tensile strength, elongation and total imperfection as these properties were improved with increasing ratio of polyester fiber. Based on experimental findings negative effect on coefficient of mass variation and an insignificant influence on hairiness were observed.
Publication Details
Page(s) 279-282
DOI DOI not available
Published Journal: Science International, Volume: 26, Issue: 1, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

38

Views