Different types of ceramics products are available in the market, which are being used for a wide variety of applications. Bricks, tiles, sanitary wares, sewer-pipes, pottery etc. are the common examples of ceramic products. The wastes generated from different products have constituted a serious adverse environmental impact in the societies. Therefore, use of ceramic waste as partially replacement material of any of constituents of the concrete, will not only control the product waste tactfully but will also economize concrete manufacturing cost. Moreover depleting sources of sand in Pakistan triggered the dire need of replacement of fine aggregate of the concrete. Experiment research was conducted to investigate the effect on compressive, tensile and flexural strength of concrete with the use of industrial ceramic waste as a partial replacement of fine aggregate in the concrete at the age of 28 days. Four types of concrete mixtures were tested in this research i.e. CC-0, CC-10, CC-15, and CC-20, where CC-0 stands for Reference Concrete and CC-10, CC-15 & CC-20 stand for concretes having 10%, 15% & 20% ceramic waste as sand replacement material respectively. Tests for compressive strength, modulus of rupture, split cylinder and double punch were performed. It revealed that the concrete produced with ceramic waste has more tensile strength, flexural strength and compressive strength when compared with reference concrete, which explicitly opened a door to use of industrial ceramic waste in concrete production.