The properties of Al contacts to n-type CdTe epilayers has been studied with view to establish a contacting technology suitable for the formation of stable low resistance junctions to CdTe layers and multilayer devices. For the case of Al contacts simple evaporation does not yield ohmic behavior. However, ohmic Al-CdTe contacts are achieved, allowing an intimate metal-semiconductor interface to be produced. This result is attributed to the deposition of thin multilayer of Ti on CdTe epilayers prior to Al deposition. This low resistance ohmic contact is very suitable for CdTe MBE grown layers and other II-VI material devices. This optimum value of ohmic contacts in this connection has been achieved by the deposition of thin 5 Á Ti prior to the Al yielding barrier height of ~0.43 eV.