In this paper computer code developed earlier by the authors (CPAIR-P) has been employed to compute corrosion product activity in PWR for flow rate perturbations. The values of radioactivity in ion exchanger of Pressurized Water Reactor (PWR) under normal and flow rate perturbation conditions have been calculated. For Linearly accelerating corrosion rates, activity saturates for removal rate of 600 cm3/s in primary coolant of PWR. A higher removal rate of 750 cm3/s was selected for which the saturation value is sufficiently low (0.28µCi/cm3). Simulation results shows that the Fe59, Na24, Mo99, Mn56 reaches saturation values with in about 700 hours of reactor operation. However, Co58, and Co60 keep on accumulating and do not saturate with in 2000 hours of these simulation time. When flow rate is decreased by 10% of rated flow rate after 500 hours of reactor operation, a dip in activity is seen, which reaches to the value of 0.00138 µCi cm-3 then again it begins to rise and reaches saturation value of 0.00147 cm3/s.