No Detail Found!

Process Investigation for Conversion of Municipal Solid Waste into Liquid Fuel

Author(s)
Usman A. Jafri Department of Polymer and Process Engineering, University of Engineering and Technology, Lahore-Pakistan
M. Tayyab Javed Department of Polymer and Process Engineering, University of Engineering and Technology, Lahore-Pakistan
Imran R. Chugtai Department of Polymer and Process Engineering, University of Engineering and Technology, Lahore-Pakistan
Abstract
An investigation was conducted on pyrolysis technology and its process to convert the municipal solid waste into useful energy (liquid fuel). The investigation includes the development of the experimental setup for this process and its future prospects in Pakistan. The methodology used for this process is the thermochemical conversion of municipal solid waste using pyrolysis technique. A pyrolysis process is under consideration for many years for the production of synthetic fuel oils from organic solid waste. The system comprises of pyrolysis reactor, condenser for condensable gas, gas holder (for non- condensable gas).The feedstock used in the pyrolysis reactor is the municipal solid waste (includes kitchen waste, papers etc) in fine mesh size i.e. 2.5 – 3.0 mm. The residue obtained were mainly char (pyrolytic oil), pyrogas (non – condensable gases) and ash, which shows that process has a potential for the treatment of the municipal solid waste and is a good technology for resource recover.
Publication Details
Page(s) 23-27
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 39, Issue: 1, Year: 2011

Request the full text from PASTIC

0

Citations

0

Downloads

28

Views