OBJECTIVE: The aim of this in vitro study is to evaluate the mechanical bonding between the heat-cure acrylic resin and the cobalt-chromium alloy for a removable partial denture (RPD). MATERIALS AND METHODS: A maxillary cast representing Kennedy`s Class 1V, was used as the master model. Two groups of 12 casts each were made from the master model. The first group of casts were made in dental stone and were used for the construction of the RPD. The second group, was used to get twelve auto polymerizing resin, to be used as manikin during the experimental procedure. Six of the stone casts were relieved with two layers of twenty six gauge adhesive wax, whereas remaining six were relieved with one layer of wax. Two casts were used as control, one with two layers relief and the other with one layer relief. Their frames were coated with 4-Meta adhesive prior to packing them with 199 Lucitone resin. During wax-up a groove with known dimensions was constructed to receive a special fixture with the same dimension tofit in during the experimental procedure. Each frame was seated on its corresponding auto polymerizing resin cast. An Instron machine was used for force application till de-bonding occurs. RESULTS: The results showed that the cast relieved with 2 layer, required a higher de-bonding forces as compared to those with one layer relief (P