No Detail Found!

The effect of material property gradient on the fracture toughness of a PMMA/PC bimaterial with a crack normal to the interface.

Author(s)
Q. H. Shah Department of Manufacturing and Materials Engineering, International Islamic University Malaysia Jalan Gombak (53100) Kuala Lumpur Malaysia
M. H. Iliyas Department of Manufacturing and Materials Engineering, International Islamic University Malaysia Jalan Gombak (53100) Kuala Lumpur Malaysia
A. F. Ismail Department of Manufacturing and Materials Engineering, International Islamic University Malaysia Jalan Gombak (53100) Kuala Lumpur Malaysia
H Homma Department of Mechanical Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka Toyohashi, Japan
Abstract
Fracture toughness tests on CT specimens were carried out to study the fracture behavior for a crack lying perpendicular to the interface in a PMMA/PC biomaterial. Polymethylmethacrylate Acrylic (PMMA) and Polycarbonate (PC) cylindrical rods were joined together using the friction welding process. CT specimens were machined out of the biomaterial cylindrical rods. A sharp crack was introduced into the specimen perpendicular to and terminating at the biomaterial interface. Specimens including monolithic and biomaterial were loaded to fracture and experimental values of K1c were obtained. Finite element analysis was used to find out the stresses in the specimens. Subsequently the stress values were used to find out the fracture toughness of each specimen. It was found that the K1c values for biomaterial specimen could into be achieved by utilizing the inverse square root singularity in stress but it was dependent upon Dundurs parameters for bimaterials.
Publication Details
Page(s) 476-481
DOI DOI not available
Published Journal: Journal of Applied Sciences, Volume: 5, Issue: 3, Year: 2005

Request the full text from PASTIC

0

Citations

0

Downloads

32

Views