No Detail Found!

Stabilizing potential of cement and fly ash mixture on expansive clay soil.

Author(s)
O. O. Amu Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
A. B. Fajobi Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
S. O. Afekhuai Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Abstract
Soil treatment or stabilization is highly recognized by geologist and engineers as a very important process in improving the performance of weak or marginal soils and make them perform better as highway materials. This study was an investigation of the potential of stabilizing an expansive clay soil with the combination of cement and fly ash. The expansive clay soil samples were first subjected general classification tests where three classes of samples evolved; 12% cement optimal mix, 9% cement plus 3% fly ash optimal mix and the 0% (unstabilized) natural clay soil sample. The three different classes of samples were then subjected to engineering tests; Maximum Dry Densities (MDD), Optimum Moisture Contents (OMC), California Bearing Ratio (CBR), Unconfined Compression and the Undrained Triaxial test. The results showed that the soil sample stabilized with a mixture of 9% cement plus 3% fly ash is better with respect to MDD, OMC, Bearing Capacity and Shearing Resistance, when compared with sample stabilized with 12% cement plus 0% fly ash. This shows that the addition of a certain percentage of fly ash will improve the stabilizing potential of cement on an expansive clay soil.
Publication Details
Page(s) 1669-1673
DOI DOI not available
Published Journal: Journal of Applied Sciences, Volume: 5, Issue: 9, Year: 2005

Request the full text from PASTIC

0

Citations

0

Downloads

28

Views