Steel ladles at Pakistan Steel have been lined with fireclay bricks and the ladle life remained around 8-9 heats. Steel produced remained dirty due to Alumino-silicate bricks and high tapping temperature. Also production was affected due to non-availability of ladles. In order to de-bottleneck and enhance production with quality it was decided to introduce the concept of using dolomite bricks in the steel ladles. Initial hit and trial results showed improvement of campaign life from 8-9 heats to 21-25 heats. Work is undertaken to investigate scientifically total process starting from raw dolomite, calcinations/dead burning, to produce dolomite sinter/crushing, milling, mixing with tar, pressing into brick shape for lining of steel ladles. The level of performance improvement with the dolomite lining over alumino-silicate material is also dependent on steel making and pouring condition such as tapping temperature, ferocity of impact, slag basicity/chemistry and finally the total residence time. It is expected that the ladle life should increase up to 40-50 heats, once the factors adversely affecting the campaign life, are controlled.