No Detail Found!

Application of grouting for seepage reduction and dam safety in carbonate geology, its management and evaluation.

Author(s)
Maqsood Shafique Qureshi Tarbela Dam Project, WAPDA, Tarbela, Pakistan
Mohammad Saleem Khan Department of Mining & Gelogical Engineering, University of Engineering & Technology, Lahore, Pakistan
Abstract
Dams constructed in carbonate geology experience large seepages, which are mainly attributed to the fractures and solutioning of the calcite of carbonate geology. Over the long periods due to seepage the cavities and fractures are further increased and result in unwarranted increase of seepage, which leads to Dam safety problems. For control of such type of seepage pressure grouting method was adopted at Khanpur Dam in its abutments and approach channel of spillway after identification of the problem. Rotary drilling rigs were used to drill the grout holes. Stage grout method was applied for grouting these drill holes with suitable pressures to seal the fractures and solution cavities. Extensive monitoring of seepage and comparisons of pre and post grouting indicates that on completion of partial D&G program, over all seepage reduction of 59%, 29% and 20% at corresponding reservoir levels of 1920, 1930 & 1940 have been achieved. Regular monitoring, proper investigation of subsurface geology and periodic grouting with appropriate techniques to cut seepage paths is very important for assurance of Dam safety.
Publication Details
Page(s) 265-270
DOI DOI not available
Published Journal: Science International, Volume: 16, Issue: 4, Year: 2004

Request the full text from PASTIC

0

Citations

0

Downloads

124

Views