Capacitors used as power system apparatus are often subjected to occasional impulse (over-voltages) in addition to be the nominal voltages. The impulses, which are the result of switching operations and occasional lightening strokes, can create problems from residual charge effect and complete failure due to dielectric breakdown. To guard against such dielectric failures there is the need of improving dielectric materials. In this research work the dielectric properties of different materials used in capacitors have been studied. The phenomenon of induced charges, polarization, relaxation, and charge trapping has been investigated in view of alternating electric field applications. Consideration has been given to the most commonly used dielectric materials such as Poly-Methyl-Metha-Acryi) (P.M. M. A), Polyethylene Terafthelate (P.E.T) and Polyester. An experiment was devised to simulate practical conditions of AC voltage stressing and impulse application to these insulating materials. The experiment work aimed at application of impulses to these materials following different magnitudes of AC voltage stresses. Results of the experiment were treated mathematically using statistical methods based on normal distribution. Conclusions on the relative impulse life characteristics of the selected samples have been drawn as a function of magnitude of AC pre-stressing.