The development in the signaling from the very inception of the systematic approach demanded a number of comprehensive and core changes in the medium and the prevailing skills as well. Now it became the dire need of the time to be considerate in connection with the problems faced by the researchers in this arena. The ultimate choice is optical fiber, which has proved to be much more advantageous as compared to other systems. One of the advantages of optical fiber is its enormous bandwidth. At present, only a fraction of the bandwidth available is being utilized. The growing need of Information Technology requires digital transmission at a much faster rate, which requires short optical pulse sources. Short optical pulses can be generated by gain switched DFB lasers and mode-locked lasers. The generated short pulses have inherent chirp that can be utilized for linear compression. Gain switched pulses followed by linear compression can be further compressed by soliton effect compression. However, there is an inherent drawback in soliton effect compression, which produces pedestals along with the compressed pulses. These spurious sidebands/pedestals results in accumulative ISI (Inter Symbol Interference) and timing jitter, which must be removed effectively. These pedestals can be removed by passing the pulses through a band pass filter, which is bulkier and an expensive component and also offers insertion loss. However, these pedestals and noise added by the repeater stations can be effectively removed by exploiting the switching characteristics of NOLM (Non-linear Optical Loop Mirror) which is composed of a simple asymmetric fiber coupler and a piece of anomalous fiber. In practice, it is impossible to test every limiting parameter such as pulse shape changes, attenuation, dispersion, and non-linearities etc. at any point in optical fiber. It is alwaysadvantageous to developmathematical models and run computer simulation before realization of any system. We have simulated the removal of noise and pedestals from compressed optical pulses by NOLM employingFFT-BPM [I]techniques. Our results show that noise andsidebands/pedestals can be effectively removed by using discriminating property of NOLM.