No Detail Found!

Preparation and characterization of activated carbon from Babul (Acacia Arabica) and coconut shells by physical activation in a fluidized bed reactor.

Author(s)
Tanzil H. Usmani PCSIR Laboratories Complex, Karachi, Pakistan
M. Tahir Motan PCSIR Laboratories Complex, Karachi, Pakistan
M. Mumtaz PCSIR Laboratories Complex, Karachi, Pakistan
M. Aleem Ahmed PCSIR Laboratories Complex, Karachi, Pakistan
Abstract
Two indigenous raw materials Babul (Acacia arabica) and coconut shells were subjected to physical activation for the preparation of activated carbon by a mixture of superheated steam and air in a S.S. fluidized bed reactor. `The influence of various operational variables like particle size of the two racy materials, time of activation and pressure of the fluidizing gas on different physical and chemical properties of tire Granular Activated Carbon (GAC) samples was investigated. Different operational parameters being optimized in this study were particle size of 1.00 - 2. (10 mm, operating pressure of 20 psi in 75 min time of activation. Ballot was however not found to be all appropriate precursor for preparing GAC probably due to its low inherent strength, eventually resulting in quite loco yield and ball pan hardness of GAC samples. Further it was concluded. that GAC in quite a good yield and adsorptive capacity in liquid as well as vapour phase systems and standard hardness was obtained from coconut shells and it was much superior, when compared with the product obtained from Babul.
Publication Details
Page(s) 5-9
DOI DOI not available
Published Journal: Pakistan Journal of Scientific and Industrial Research, Volume: 46, Issue: 1, Year: 2003

Request the full text from PASTIC

0

Citations

0

Downloads

39

Views