No Detail Found!

Design, Fabrication, and Simulation Analysis of Innovative Chainless Leverage Bicycle

Author(s)
Nasir Akbar Department of Mechanical Engineering, University of Engineering & Technology Mardan, 23200, Pakistan
Arshad Ali Khan Department of Mechanical Engineering, University of Engineering & Technology Peshawar-Jalozai Campus, 24100, Pakistan
Tauseef Ahmad Department of Mechanical Engineering, University of Engineering & Technology Peshawar-Jalozai Campus, 24100, Pakistan
Muhammad Jibran Khalil Department of Mechanical Engineering, University of Engineering & Technology Peshawar-Jalozai Campus, 24100, Pakistan
Sohaib Ahmed Department of Mechanical Engineering, University of Engineering & Technology Peshawar-Jalozai Campus, 24100, Pakistan
Abstract
For the past few decades, many attempts have been made to design/suggest innovative and effective ways to create bicycles using chainless drives. Although chained bicycles are still widely used because they are lightweight and have low initial cost, as off-road riding torque requirements rise, we have observed that the chain either breaks or disengages from the sprocket. Many designs like Worm and bevel gears make up most of the newly suggested mechanical ideas for altering or replacing chains. A significant obstacle to this progress is the bicycle's speed, the cost of producing the gears, and the cost of maintenance or repair. First a CAD model of Chainless Leverage mechanism that has preferred advantages of low maintenance cost, high speed, high durable and reliable over chained bicycles was created with some modifications in its components from chained bicycle. Stress, force, fatigue and factors of safety analysis were made for evaluating different mechanical properties for different materials and finalizing safe, efficient and cost-effective materials for different parts of the project. A 3D print Model of the mechanism has also been fabricated for checking feasibility of the mechanism. The results of maximum stress, maximum force, factor of safety and yield strength have been obtained from CAD model simulations for different materials and accordingly materials selections have been made for different components. Finally, based on the selected materials, and 3D print Model testing a chainless Leverage mechanism have been fabricated. The fabricated chainless leverage bicycle was found with low maintenance cost, durable, reliable and high speed.
Publication Details
Page(s) 79-94
DOI DOI not available
Published Journal: The Sciencetech, Volume: 6, Issue: 3, Year: 2025

Request the full text from PASTIC

Keywords
3D printing, CAD Modeling, Stress Analysis, Material Selection, Chainless Leverage Mechanism
References
Miller N. R.,Ross D. .1980 .The design of variable-ratio chain drives for bicycles and ergometers-application to a maximum power bicycle drive. , : .
Pan .2025 .“Bioinspired Mechanisms and Actuation of Soft Robotic Crawlers. , : 2416764.
Rajesh C.,Suneetha D.,Abraham K. .2017 .“Chainless Cycle Using Gear Drive Mechanism. International Journal of Approximate Reasoning, 5(6) : 194-199.
Rankin J. W.,Neptune R. R. .2008 .A theoretical analysis of an optimal chainring shape to maximize crank power during isokinetic pedaling. Journal of biomechanics, 41(7) : 1494-1502.
Reddy N.K.,Kumar P.N.,Kumar G.V.P.,Roy V.,Kumar K.,July M. .2021 .“Design and Fabrication of Chainless Bicycle” Department of Automobile Engineering, Godavari Institute of Engineering and Technology (A), Rajahmundry. , : .
Sowjanya C.,Nagabhushana Rao V.,Pavani Sri Kavya B. .2021 .Optimum design and analysis of bell crank lever for an automobile. In Advanced Manufacturing Systems and Innovative Product Design: Select Proceedings of IPDIMS 2020, : 189-208.
Rao Srinivasa,Muzibul P.,Naveen M.,Ravikumar V.,Subbarao R.,Yaswanth S.,P. S. .2022 .“Design and Analysis of Lever Type Chainless Drive Mechanism of a Bicycle” (. Journal of animal science and Biotechnology, : 41-53.
Prabin Vijayan. S.N.,Venkatasubramanian Vijayan. S.N.,Sakthivel. M Vijayan. S.N. .2018 .Performance Analysis of Bicycle Driven by Gear and Shaft Transmission System” International journal for research in emerging science and technology. , : apr-2016.
Wang Y.,Ji D.,Zhan K. .2013 .Modified sprocket tooth profile of roller chain drives. Mechanism and Machine Theory, 70 : 380-393.
Zakariya H.,Dashrath K.,Farrukhzama H.A.Q.,Kavhale S. .2018 .“Design and Fabrication of Chainless Bicycle” International Research Journal of Engineering and Technology (IRJET. , : 2395-0072.
Zamparo P.,Minetti A. E.,P. E. A. E. .2002 .Mechanical efficiency of cycling with a new developed pedal-crank. Journal of biomechanics, 35(10) : 1387-1398.
0

Citations

0

Downloads

6

Views