Bridges are both critical and costly components of a transportation system and play key role in the development of a nation. Due to their strategic importance, they should be properly designed, constructed and maintained so as to allow uninterrupted flow of traffic during their design lives. Pakistan Code of practice for Highway Bridges has become obsolete as no amendments have been made in it since its publication in 1967. To study the behaviour of bridge system and evaluate the code provision, a prototype composite I-beam bridge superstructure, consisting of reinforced concrete deck slab supported by four steel girders, was selected and designed in accordance with the provisions of AASHTOP LRFD Bridge Design Specifications. A 1/6th reduced-scale model of selected bridge system was constructed in the laboratory, instrumented with strain gages and strain gage-based transducers, loaded with load cells, and its response was measured with the help of a data logger to static loads simulating AASHTO Design Truck. Numerical models of the bridge system were also developed in SAP2000 and their responses were compared with those obtained from the experiments. This paper covers selection of the bridge configuration, design of various components of the ridge superstructure, dimensional analysis carried out and the resulting similitude requirements, description and calibration of the testing facilities, and finite element modeling of the bridge superstructure.