Humanity is concerned about the existence of contaminants in water because drinking water with low levels of contaminants can have detrimental effects on one's health. Various technologies have been employed to lessen or completely eradicate these contaminants. Adsorption has been emphasized due to its inexpensive and straightforward removal process, and nanomaterials, such as graphene oxide, have been described as excellent adsorbents in environmental remediation due to their functional groups that provide stability, antifouling, and hydrophilicity-all of which are critical for the removal of arsenic from soil and water. Rapid industrialization raises the amounts of arsenic in soil, groundwater, and water bodies; this toxicity has caused disasters in emerging nations. The goal of this research is to synthesize graphene oxide (GO), a sophisticated nanomaterial adsorbent for the removal of dangerous arsenic from water. GO has demonstrated a high and quick capacity to remove arsenic. Because to surface complexation, electrostatic attraction, and ion exchange processes, it has a great affinity for both forms of arsenic through hydrophobic surfaces with large acidic groups and hydrophobic surfaces with hydrophilicity and contact. Furthermore, the adsorption process is undoubtedly impacted by the GO's thickness and porosity, the types of arsenic in the water, and the experimental setup. The titration technique was used for adsorption measurement, and the experimental results were compared to raw graphene, which has a restricted capacity for adsorption. GO achieved the highest adsorption in samples of arseniccontaminated water and soil solutions. The findings show that GO can provide a promising adsorption capability for the removal of ionic arsenic from soil and water in the field of water purification