No Detail Found!

Integrated Geomechanical and Petrographic Assessment of the Lockhart Limestone: A Comparative Study of Potwar and Hazara Basins, Pakistan

Author(s)
Mubariz Hassan Department Earth Sciences, Abbottabad University of Science and Technology, Havelian, Pakistan; Department of Earth Sciences, University of Lille 1, Cité Scientifique, 59655 Villeneuve d’Ascq, France
Faisal Shah Department Earth Sciences, Abbottabad University of Science and chnology,Havelian,PakistanDepartment of Earth Sciences, COMSATS University Islamabad,Abbottabad,Pakistan
Tariq Mahmood OGDCL,Islamabad,Pakistan
Abstract
The Potwar and Hazara Basins host wide-spread exposures of the Lockhart Limestone, a Paleocence carbonate sequence with significant potential as a construction aggregate. This study attempts to provide an integrated geomechanical and petrographic assessment of the Lockhart Limestone exposed near Dhak Pass (Potwar Basin) and Margala Pass (Hazara Basin) in order to evaluate its engineering suitability and to examine the influence of petrographic attributes on its mechanical behavior. Representative limestone samples were analyzed for standard geotechnical and aggregate quality tests including specific gravity, water absorption, sulphate soundness, Los Angeles abrasion, and uniaxial compressive strength (UCS), complemented with petrographic thin-section analysis. The investigated limestone exhibits a mean specific gravity of 2.71 and low water absorption values (0.52-0.53%), indicating low effective porosity and a dense carbonate framework. Los Angeles abrasion values of 14.5% at Dhak Pass and 15.6% at Margala Pass, together with sulphate soundness values are 0.61% and 0.59%, respectively, reflect high resistance to mechanical degradation and weathering processes. UCS values range from 29.75 MPa at Dhak Pass section to 23.27 MPa at Margala Pass section, indicating relatively enhanced mechanical competency in the Potwar Basin succession. Petrographic investigation classifies the limestone as predominantly wackestone, packstone, and grainstone composed mainly of calcite and benthic foraminiferal bioclasts, with subordinate clay minerals, dolomite, and iron oxides. The carbonate fabric records multiple diagenetic modifications which include micritization, cementation, and recrystallization, alongside variably developed microfractures partially filled with calcite and ferruginous material. These microstructural heterogeneities are more pronounced in the Margala Pass section and exert a significant control on aggregate strength and durability. The absence of reactive silica phases and less abundance of deleterious material indicate a negligible susceptibility to Alkali- Silica Reaction (ASR) and Alkali-Carbonate Reaction (ACR) with Ordinary Portland Cement (OPC). Correlation of geomechanical and petrographic data indicates that enhanced mechanical performance is associated with high UCS values having calcite rich, well cemented microfacies, whereas lower UCS values correspond to increased microfracturing, bioclast content, and localized argillaceous input. The results suggest that fabric integrity, degree of cementation, bioclasts abundance, and diagenetic alterations constitute the principal controls
Publication Details
Page(s) 1-92
DOI DOI not available
Published Journal: Book of Abstracts: 8th International Conference "Earth Sciences Pakistan 2026" (ESP-2026), June 12-14, 2026, Volume: 1, Issue: 1, Year: 2026

Request the full text from PASTIC

0

Citations

0

Downloads

9

Views