Petrographic studies and mechanical investigations of carbonate rock in the vicinity of Mughal Kot section of the eastern Suleiman ranges in western Pakistan were carried out to assess their feasibility for geotechnical purposes. Mughal Kot section comprises different lithologies including shale, sandstone, and carbonates. Carbonate rocks of Mughal Kot section can be texturally divided into mudstone, wackestone, packstone and grainstone. Mudstone and wackestone samples are studied in the current approach. Mud supported carbonates are highly composed of micrite and bioclast with no intraclasts and peliods. Few samples have a little amount of sparite. In order to describe a grain, measurement of rock texture, relative proportions of matrix (packing density) and grains, shape, orientation, and degree of grain interlocking have been developed known as Texture Coefficient (TC). The texture coefficient was measured by using software for detailed petrographic analysis. The TC reveals statistically major relations with strength of rock and other mechanical properties. For geotechnical purposes, physico-mechanical and aggregate properties including UCS, Los-Angeles abrasion, Water absorption, specific gravity and porosity representing various textural varieties were determined and correlated with texture coefficient. Depending on these statistical values and texture coefficient data a graphical comparison is made that indicates that mud supported carbonates show an inverse relationship between strength and texture coefficient (TC). It is further observed that fine-grained and mud supported show high strength than their counterparts. The results of geotechnical tests show that the studied carbonates are well within the permissible range to be used as aggregate for both concrete and asphalt works.