Indus Fan covers an area of more than 1.1 x 106 km2, totaling around 5 x 106 km3 in volume. The Indus River derived sediments were the main contributors of the sediment filled in the Indus Basin. The Indus Canyon and the complex of the channel-levee system formed by the turbidity currents are the dominating controlling process, along with the pelagic sedimentation and mass wasting deposition, in the formation of the Indus Fan. The intensity and frequency of the turbidity currents varied in response to the sea-level changes. Turbidity currents, mainly during the late Tertiary sea-level low stands, transported sediments to the fan from the Indus Delta, through the Indus Canyon and into an extensive, complex, meandering and braided network of fan valleys. Silt and sand were deposited within the channels whereas, clay and sand-size mica were deposited from over bank flows on the levees. During the high sea-level stands the terrigenous sediments were generally trapped within the Indus Delta and thus the fan became the site of predominantly pelagiclhemipelagic sedimentation; this is represented by the draping of foraminiferal-nannoplankton ooze over most of the channel-levee system. Pelagic deposits on the elevated levee deposits are produced through the abandonment of active channels, which would allow pelagic/hemipelagic sediments to accumulate until the channels become reactivated or another channel migrates across the area.