The marble industry in KPK generates large volume of wastewater characterized by high suspended solids, elevated alkalinity, dissolved solids, and organic contaminants, primarily originating from cutting, shaping, and polishing processes. Untreated discharge of wastewater contributes to several environmental challenges, including water pollution, soil degradation, deterioration of ground water quality, and increased turbidity in nearby water bodies. This study investigates the physical characteristics of marble wastewater and evaluates an integrated low-cost treatment system designed for small and medium marble units in Peshawar. The experimental setup consisted of two lamella settlers in series followed by a multi-media filtration unit. Wastewater samples were analyzed for turbidity, TSS, TDS, COD, conductivity, and pH across different flow rates ranging from 1-5 L/min. lamella settlers enhanced solid-liquid separation through inclined-plate sedimentation, reducing TSS from initial 10,400 mg/L to 1180 mg/L, while the filtration unit further lowered it to 250 mg/L. turbidity removal was 88%, and COD reduction above 70% at optimal flow conditions. Performance reduced at higher flow rates due to less retention time and hydraulic overload. The unit was constructed using locally available materials, offering affordability, easy operation, and scalability. Treated water meets reuse standards for marble processing, supporting reduced freshwater demand. The system aligns with SDG-6 and SDG-12 by promoting water reuse and sustainable industry practices.