No Detail Found!

Experimental Evaluation of Tensile Strength in Thin Bitumen Films

Author(s)
Abdul Samad Mehran University of Engineering & Technology,Jamshoro, Sindh ,Pakistan
Rizwan Ali Memon Mehran University of Engineering & Technology,Jamshoro, Sindh ,Pakistan
Umair Ali Mehran University of Engineering & Technology,Jamshoro, Sindh ,Pakistan
Abstract
Asphalt binder is a viscoelastic material that acts as a thin film between aggregates, and the ability of an asphalt mixture to resist stresses is largely attributed to binder’s performance. Current asphalt binder characterization in Pakistan uses empirical methods, such as penetration and viscosity grade systems, which fail to capture the fundamental viscoelastic properties of asphalt binder. The improved Performance Grade (PG) systems which uses Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR) are costly and complex for practical adoption in developing nations like Pakistan. Therefore, the recent field validated Poker Chip test for measuring the tensile strength of asphalt binders was used to characterize asphalt binders. Two binder grades, 60/70 and 80/100 and mastics at 25°C and 40°C were tested for their tensile strength in Universal Testing Machine at monotonic strain rate of 5 mm/min. Between 60/70 and 80/100 binders, former had higher values than the latter, which is consistent with so-called penetration test. For both binders, increasing temperature resulted in lower tensile strength values at both the binder and mastic levels.
Publication Details
Page(s) 1-1
DOI DOI not available
Published Journal: SPI-2026: Abstract book on 7th International Conference on Sustainability in Process Industry (SPI-2026), February 9-10, 2026, Volume: 1, Issue: 1, Year: 2026

Request the full text from PASTIC

Keywords
Mastics, Asphalt, Tensile Strength, Poker Chip Test
0

Citations

0

Downloads

10

Views