No Detail Found!

Studies on the improvement of spectroscopic analysis of arseniosiderite ore from Pakistan.

Author(s)
Ishrat Rehana Central Analytical Facility Division (CAFD), PINSTECH, Islamabad, Pakistan
S. Ahmed Central Analytical Facility Division (CAFD), PINSTECH, Islamabad, Pakistan
Saeed Ahmed Central Analytical Facility Division (CAFD), PINSTECH, Islamabad, Pakistan
Abstract
Arsenic is one of the elements of industrial importance and is being used in industries. In the present studies., the determination of arsenic was carried out in the Arsenide deposite of economic importance which occur near Hunza, Gilgit belt in NWFP. Beneficiatin studies of eight representative samples from these deposits were undertaken by Atomic Emission Spectrography. The objective of this study was to estimate arsenic, in presence of these interfering elements, for utilization in various industries. The proposed method is quick and reproducible, consuming a small amount of the sample (100mg). Procedure utilizing buffer was developed to increase the sensitivity of the arsenic, and reduce the background to an acceptable level. The buffer consisted of lithium oxide and graphite in a ratio of 10:90 respectively. The proportion of buffer to the charge of anode was 30%. Indigenously prepared perforated electrodes were used. The excitation of arsenic depends mainly on arcing period and the anode charge, which in turn decide the residence time of the analyte in the plasma stream. This ultimately leads to limit of quantification and sensitivity. The optimum exposure period was found to be 90 seconds along with 12 Amp. dc-arc. The precision measured in terms of variation coefficient was found to be 3-13%.
Publication Details
Page(s) 273-276
DOI DOI not available
Published Journal: Science International, Volume: 18, Issue: 4, Year: 2006

Request the full text from PASTIC

0

Citations

0

Downloads

46

Views