The purpose of the study is to make pixel calibration phantom, to measure pixel size for different zoom factors and matrix sizes and to compare the pixel size with the values provided by the vendor. For this purpose pixel size calibration phantom (rectangular in shape) make up of acrylic material having dimension 43x10 square cm was prepared. Seven circular holes at exact known distance with hole diameter 1.5mm were born. High specific activity was filled in the holes of the phantom, acquired the image by fixing the number of counts at all available matrices and zoom factors. Pixel size was calculated by counting the number of pixels between focused points and divided the distance thereof by the number of pixels. Mean pixel size was calculated and compared it with reference value provided by the manufacturer of the camera. P-value was calculated which showed that most results lie in the acceptable limit. The calculated values agreed very well. However there exists some deviation at larger matrix sizes, which might be due to scattering of radiation that overlaps nearest pixels, and due to human error.