No Detail Found!

Maximizing the Performance of Laser Cut Panel by Interaction of Ceiling Geometries and Different Aspect Ratio

Author(s)
Ahmed A. Freewan College of Architecture and Design, Jordan University of Science and Technology, Irbid 22110, Jordan.
Abstract
The interaction between different ceiling geometries with laser cut panels (LCPs) is investigated using real experiments and computer simulations to maximize the daylight performance of the LCP. In addition, LCP with different aspect ratios (width to depth ratio) is studied using simulation with clear sky conditions in hot climate region. Two main performance parameters are investigated: illuminance level and distribution uniformity in a large space located in a sub-tropical climate region like Jordan. It was found that curved and chamfered ceilings increased the daylight level in the rear part of the studied room by 20% compared to a horizontal flat ceiling and reduce it by 30% in front part that improve the quality of daylight by improving the uniformity. LCP with high aspect ratio of 5:6 performed well in climate with clear sky and high solar angles than LCP with ratio of 4:6.
Publication Details
Page(s) 29-35
Published Journal: Journal of Daylighting, Volume: 1, Issue: 1, Year: 2014

Request the full text from PASTIC

Keywords
Laser cut panel, Illuminance level, Uniformity, Ceiling geometry
References
Edmonds I. R. .1993 .Performance of laser cut light deflecting panels in daylighting applications. Solar Energy Materials and Solar Cells, 29 : 1-26.
Sharples S.,P. R Tregenza S. .2001 .Glazing daylight transmittances: a field survey of windows in urban areas. Building and Environment, 36 : 503-509.
Edmonds I.R.,Pearce D.J. .1999 .Enhancement of crop illuminance in high latitude greenhouses with laser-cut panel glazing. Solar Energy, 66 : 255-265.
Reppel J.,I.R Edmonds J. .1998 .Angle-selective glazing for radiant heat control in buildings: theory, Solar Energy 62 (. , : 245-253.
Greenup P.J.,Edmonds I.R.,Compagnon R.,Laser-Cut Panel Light Redirecting Elements R. .2000 .. Lighting Research and Technology, 32 : 49-54.
Venturi L.,Wilson M.,Jacobs A.,Solomon J. .2006 .Light piping performance enhancement using a deflecting sheet. Lighting Research and Technology, 38 : 167-179.
I. Edmonds .2005 .Daylighting high-density residential buildings with light redirecting panels. Lighting Research and Technology, 37 : 73-84.
Edmonds I.R,Greenup P.J .2002 .Daylighting in the tropics. Solar Energy, 73 : 111-121.
Freewan A. A.,Shao L.,Riffat S. .2009 .Interactions between louvers and ceiling geometry for maximum daylighting performance. Renewable Energy, 34 : 223-232.
Freewan A.A.,Shao L.,S. Riffat, L. .2008 .Optimizing performance of the lightshelf by modifying ceiling geometry in highly luminous climates. Solar Energy, 82 : 343-353.
Tian M.,Su Y. .2014 .An Improvement to Calculation of Lighting Energy Requirement in the European Standard EN 15193:2007. Journal of Daylighting, 1 : 16-28.
Freewan A.,Riffat S.,L. Shao, S. .2006 .Optimising performance of lightshelf by modifying ceiling geometry. in: World Renewable Energy Council, : .
Rakha T.,Nassar K. .2011 .Genetic algorithms for ceiling form optimization in response to daylight levels. Renewable Energy, 36 : 2348-2356.
Freewan A. A. .2011 .Modifying Courtyard Wall Geometries to Optimize the Daylight Performance of the Courtyard. Sustainability in Energy and Buildings, 7 : 57-64.
P.J Greenup I.R Edmonds .2004 .Test room measurements and computer simulations of the micro-light guiding shade daylight redirecting device. Solar Energy, 76 : 99-109.
Mardaljevic J. .2001 .The BRE-IDMP dataset: a new benchmark for the validation of illuminance prediction techniques. Lighting Research and Technology, 33 : 117-134.
Mardaljevic J. .1999 .Daylight simulation: validation, sky models and daylight coefficients. PhD thesis, : .
Mardaljevic J. .1995 .Validation of a lighting simulation program under real sky conditions. Lighting Research and Technology, 27 : 181-188.
Freewan A.A. .2011 .Improving Daylight Performance of Light-well in Multistory Apartment Buildings. in: SET2011, : .
Al-Sallal and M. M. Bin Dalmouk K. A. .2011 .Indigenous buildings' use as museums: Evaluation of day-lit spaces with the Dreesheh double panel window. Sustainable Cities and Society, 1 : 116-124.
Freewan A. A.Y.,Gharaibeh A. A.,M. M. Jamhawi A. A. .2014 .Improving daylight performance of light wells in residential buildings: Nourishing compact sustainable urban form. Sustainable Cities and Society, 13 : 32-40.
Freewan A. A.Y. .2014 .Impact of external shading devices on thermal and daylighting performance of offices in hot climate regions. Solar Energy, 102 : 14-30.
0

Citations

0

Downloads

8

Views