No Detail Found!

Co-firing of commercial fuel oil and producer gas from downdraft gasifier for industrial applications.

Author(s)
Ahmad Hussain Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
Farid Nasir Ani Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
Saleem Raza Samo Department of Energy & Environment Engineering, QUEST, Nawabshah, Pakistan
Abstract
Biomass is one of the most promising energy resource which is expected to substitute the fossil fuel in near future. Biomass is also available in almost every part of the world. Fortunately, Malaysia is rich in its agricultural residue such as palm oil solid waste, coconut shell, rice husk and many more. Theses waste can be utilized as an alternate energy source rather than to be dumped. As a matter of fact, land disposal is causing serious environmental pollution to the environment. Among the various biomass wastes available in Malaysia, oil palm solid waste has tremendous potential to be utilized as a fuel to generate a combustible producer gas. In this study, co-combustion of diesel oil and producer gas, from a downdraft gasifier, was done in an experimental combustion chamber. The combustion behaviour and emissions properties of the co-combustion process were analyzed. Experimentation was done for combustion of diesel oil alone as well as combustion of producer gas alone and co-combustion of liquid fuel and producer gas. Data were recorded at different equivalence ratio and producer gas flows. It was found that the producer gas can be co-combusted with liquid fuel. The emission data shows that the co-combustion process produces more CO, NOX, SO2 and CO2 compared to the combustion of diesel oil only. However, the exhaust temperature for the co-combustion process is considerable higher than the diesel combustion only which can utilized in obtaining higher boiler pressures and temperatures.
Publication Details
Page(s) 1-12
DOI DOI not available
Published Journal: Quaid-e-Awam University Research Journal of Engineering, Science and Technology, Volume: 7, Issue: 1, Year: 2006

Request the full text from PASTIC

0

Citations

0

Downloads

76

Views