No Detail Found!

How Accurate is the Fit of Additive 3D-Printed Implant-Supported Restorations and Partial Coverage Posterior Restorations? A Systematic Review

Author(s)
Ahmed S. Khalil Faculty of Dentistry, Alexandria University, Alexandria, Egypt
Rawan S. Alrehaili Dentistry, Private Sector, Medina, Saudi Arabia
Suha Alenazi College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia
Fulwah Alfawzan College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia
Rahaf Alobaidi College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia
Alanoud Alshami College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia
Taher Sultan College of Dentistry, Vision College, Jeddah, Saudi Arabia
Fatima Alahmari Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
Layan Alarjan College of Dentistry, Jouf University, Jouf, Saudi Arabia
Noo Alshammari College of Dentistry, Hail University, Hail, Saudi Arabia
Thamer M. Alzahrani Periodontist, King Saud Medical City, Riyadh, Saudi Arabia
Abstract
Background: Accuracy of fit is a critical determinant of the clinical success and longevity of dental restorations, particularly for implant-supported and partial coverage posterior restorations. Although subtractive milling techniques have been widely used in dentistry, additive manufacturing technologies have emerged as promising alternatives, offering the potential for greater accuracy, customization and cost-efficiency. This systematic review aimed to compare the accuracy of fit of additive 3D-printed implant-supported and partial coverage posterior restorations with subtractive milling and conventional techniques. Methods: The review followed PRISMA guidelines. A comprehensive electronic search was conducted across PubMed, Cochrane Library, Web of Science, Embase and Scopus to identify relevant studies. Studies were included if they evaluated the accuracy of fit of additive 3D-printed implant-supported restorations and partial coverage posterior restorations, compared to subtractive milling or conventional techniques. The modified CONSORT checklist for in vitro studies was used to assess methodological quality and risk of bias. Results: A total of 1,913 records were identified and after removing duplicates and screening for eligibility, eight in vitro studies were included. The studies evaluated 322 samples across a range of implantsupported frameworks, inlays and onlays. Technologies assessed included Selective Laser Melting (SLM), stereolithography (SLA), Digital Light Processing (DLP) and multijet 3D printing, alongside CAD/CAM milling and conventional casting. The findings consistently demonstrated that additive manufacturing achieved accuracy of fit comparable to subtractive milling in simple designs, while three-dimensional printed restorations exhibited better marginal and internal adaptation, especially for complex geometries. Conventional casting and milling techniques showed larger discrepancies, particularly for multiunit frameworks. The risk of bias was generally low across all included studies, although variation in measurement techniques and the lack of sample size justification were noted as limitations. Conclusion: This systematic review indicates that additive manufacturing techniques offer improved accuracy of fit compared to subtractive milling and conventional methods for implant-supported restorations and partial coverage posterior restorations. However, the in vitro design of the studies limits the direct clinical applicability of the findings.
Publication Details
Page(s) 12-22
Published Journal: Journal of Pioneering Medical Sciences, Volume: 14, Issue: 9, Year: 2025

Request the full text from PASTIC

Keywords
Additive Manufacturing, 3D printing, Inlay, Onlay, Implant-Supported Restoration
References
Holmes J.R. .1989 ."Considerations in Measurement of Marginal Fit.". Journal of Prosthetic Dentistry, 62 : 405-408.
Cunali R.S. .2017 ."Marginal and Internal Adaptation of Zirconia Crowns: A Comparative Study of Assessment Methods." Brazilian Dental Journal. , 28 : 467-473.
Junior W.M. .2019 ."Analysis of Vertical Misfit of Crowns Fabricated with CAD/CAM Technology Using Two Scanning Techniques: Direct and Indirect.". Journal of Contemporary Dental Practice, 20 : 285-290.
Patzelt S.B.M. .2014 ."Accuracy of Computer-Aided Design/Computer-Aided Manufacturing-Generated Dental Casts Based on Intraoral Scanner Data." Journal of the American Dental Association. , 145 : 1133-1140.
Ram S.M. .2019 ."Microcomputed Tomography: A Noninvasive Method to Evaluate the Fit of a Restoration as Compared to Conventional Replica Technique.". Journal of Indian Prosthodontic Society, 19 : 233-239.
Reymus M. .2020 ."Fracture Load of 3D-Printed Fixed Dental Prostheses Compared with Milled and Conventionally Fabricated Ones: The Impact of Resin Material, Build Direction, Post-Curing and Artificial Aging-An in vitro Study." Clinical Oral Investigations. , 24 : 701-710.
Furtado de Mendonca A. .2019 ."Microstructural and Mechanical Characterization of CAD/CAM Materials for Monolithic Dental Restorations.". Journal of Prosthodontics, 28 : 119-125.
Rezaie F.,Applications Emerging . ."3D Printing of Dental Prostheses: Current. " Journal of Composite Science, 7(2023) : 109-116.
Amaya-Rivas J.L. .2024 ."Future Trends of Additive Manufacturing in Medical Applications: An Overview.". Heliyon, 10 : 26-30.
Murr L.E. .2012 ."Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies.". Journal of Materials Science and Technology, 28 : 1-14.
Goodridge R.D. .2012 ."Laser Sintering of Polyamides and Other Polymers." Progress in Materials Science. , 57 : 229-267.
Tamac E. .2014 ."Clinical Marginal and Internal Adaptation of CAD/CAM Milling, Laser Sintering and Cast Metal Ceramic Crowns.". Journal of Prosthetic Dentistry, 112 : 909-913.
Krithikadatta J. .2014 ."CRIS Guidelines (Checklist for Reporting In-Vitro Studies): A Concept Note on the Need for Standardized Guidelines for Improving Quality and Transparency in Reporting In-Vitro Studies in Experimental Dental Research.". Journal of Conservative Dentistry, 17 : 301-304.
Faggion C.M. .2012 ."Guidelines for Reporting Pre-Clinical in vitro Studies on Dental Materials.". Journal of Evidence Based Dental Practice, 12 : 182-189.
Akçin E.T. .2018 ."Effect of Manufacturing Techniques on the Marginal and Internal Fit of Cobalt-Chromium ImplantSupported Multiunit Frameworks. " Journal of Prosthetic Dentistry, 120 : 715-720.
Ahlholm P. .2019 ."Accuracy of Inlay and Onlay Restorations Based on 3D Printing or Milling Technique - A Pilot Study.". European Journal of Prosthodontics and Restorative Dentistry, 27 : 56-64.
Revilla-León M. .2020 ."Influence of Scan Body Design and Digital Implant Analogs on Implant Replica Position in Additively Manufactured Casts.". Journal of Prosthetic Dentistry, 124 : 202-210.
Ghofa Abu,A. Abu,Önöral Ö.,Technologies Subtractive .2023 ."An Assessment of the Passivity of the Fit of Multiunit Screw-Retained Implant Frameworks Manufactured by Using Additive. " Journal of Prosthetic Dentistry, 129 : 440-446.
Revilla-León M. .2021 ."Discrepancy at the Implant AbutmentProsthesis Interface of Complete-Arch Cobalt-Chromium Implant Frameworks Fabricated by Additive and Subtractive Technologies Before and After Ceramic Veneering.". Journal of Prosthetic Dentistry, 125 : 795-803.
Cantó-Navés O.,Onlays Milled .2023 .". Materials (Basel), 16 : 190-198.
Lim Y.A. .2023 ."Evaluation of Fitness and Accuracy of Milled and Three-Dimensionally Printed Inlays.". European Journal of Dentistry, 17 : 1029-1036.
Pasha S. .2023 ."Evaluation of Internal Adaptation and Marginal Fit of Onlays Fabricated Using Computer-Aided Design (CAD)-Computer-Aided Manufacturing (CAM) and Three-Dimensional Printing Techniques: An in vitro Study.". Cureus, 15 : 1-10.
Pompa G. .2015 ."Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An in vitro Study." BioMed Research International. , : 1-7.
Castillo-Oyagüe R.,Agents R. .2013 ."Misfit and Microleakage of Implant-Supported Crown Copings Obtained by Laser Sintering and Casting Techniques, Luted with Glass-Ionomer, Resin Cements. " Journal of Dentistry, 41 : 90-96.
Xu D. .2014 ."The Marginal Fit of Selective Laser MeltingFabricated Metal Crowns: An in vitro Study.". Journal of Prosthetic Dentistry, 112 : 1437-1440.
Sundar M.K. .2014 ."Marginal Fit and Microleakage of Cast and Metal Laser Sintered Copings-An in vitro Study.". Journal of Prosthodontic Research, 58 : 252-258.
Kim K. .2013 ."An Evaluation of Marginal Fit of Three-Unit Fixed Dental Prostheses Fabricated by Direct Metal Laser Sintering System.". Dental Materials, 29 : 91-96.
Nesse H. .2015 ."Internal and Marginal Fit of CobaltChromium Fixed Dental Prostheses Fabricated with 3 Different Techniques. " Journal of Prosthetic Dentistry, 114 : 686-692.
van Noort,R. Noort .2012 .. The Future of Dental Devices Is Digital." Dental Materials, 28 : 3-12.
Opdam N.J.M. .2014 ."Longevity of Posterior Composite Restorations.". Journal of Dental Research, 93 : 943-949.
Bustamante-Hernández N. .2020 ."Clinical Behavior of Ceramic, Hybrid and Composite Onlays: A Systematic Review and MetaAnalysis.". International Journal of Environmental Research and Public Health, 17 : 7582-7599.
Lerner H. .2021 ."Trueness and Precision of 3D-Printed versus Milled Monolithic Zirconia Crowns: An in vitro Study.". Journal of Dentistry, 113 : 103792.
Khorsandi D. .2021 ."3D and 4D Printing in Dentistry and Maxillofacial Surgery: Printing Techniques, Materials and Applications.". Acta Biomaterialia, 122 : 26-49.
Jeong M. .2023 ."Materials and Applications of 3D Printing Technology in Dentistry: An Overview.". Dentistry Journal, 12 : 1-9.
Németh A.,Meta-Analysis Network .2023 ."Clear Guidance to Select the Most Accurate Technologies for 3D Printing Dental Models -. " Journal of Dentistry, 134 : 104532.
Ahmad S. .2022 ."Review on 3D Printing in Dentistry: Conventional to Personalized Dental Care.". Journal of Biomaterials Science, Polymer Edition, 33 : 2292-2323.
Chander N.G.,Gopi A. .2024 ."Trends and Future Perspectives of 3D Printing in Prosthodontics.". Medical Journal Armed Forces India, 80 : 399-403.
Bae E.J. .2017 ."A Comparative Study of Additive and Subtractive Manufacturing for Dental Restorations. " Journal of Prosthetic Dentistry, 118 : 187-193.
Karasan D. .2022 ."Accuracy of Additively Manufactured and Milled Interim 3-Unit Fixed Dental Prostheses.". Journal of Prosthodontics, 31 : 58-69.
Kakinuma H.,Methods Milling .2022 ." Dental Materials Journal. , 41 : 2022-2074.
No-Cortes J. .2022 ."Trueness, 3D Deviation, Time and Cost Comparisons Between Milled and 3D-Printed Resin Single Crowns.". European Journal of Prosthodontics and Restorative Dentistry, 30 : 107-112.
No-Cortes J. .2024 ."Comparison of 3D-Printed Single Crown Outcomes Among Different Computer-Aided Design Software Programs.". International Journal of Prosthodontics, 37 : 63-70.
0

Citations

0

Downloads

60

Views