No Detail Found!

Assessment of Electromechanical Performance of Graphene-Reinforced Aluminum Nanocomposites for Energy Storage Solutions

Author(s)
Shashank Dubey Department of Mechanical Engineering, Veer Bahadur Singh Purvanchal University,Jaunpur, Uttar Pradesh,India 222003
Sandip Kumar Singh Department of Mechanical Engineering, Veer Bahadur Singh Purvanchal University,Jaunpur, Uttar Pradesh,India 222003
Abstract
Graphene insertion into aluminium matrix composites (AMCs) has demonstrated a great deal of promise for improving the electromechanical characteristics that are essential for energy storage applications. This work explores the electromechanical properties of aluminium nanocomposites reinforced with graphene, with a particular emphasis on the materials' conductivity, capacity for storing charge, and general appropriateness for applications in super capacitors and advanced batteries. Aluminium can be reinforced with graphene because of its superior mechanical strength, large surface area, and outstanding electrical conductivity. A range of fabrication techniques, including chemical reduction procedures and powder metallurgy, were utilized to attain the best possible dispersion of graphene in the aluminium matrix. Optimising the interfacial connection between graphene and aluminium resulted in improved electromechanical performance and efficient load transmission.The results of this study highlight the potential contribution of aluminium nanocomposites reinforced with graphene to the advancement of energy storage technologies. Future research will concentrate on understanding the fundamental principles that control these materials' electromechanical behaviour and investigating the materials' long-term stability and scalability for commercial uses.
Publication Details
Page(s) 1950-1958
Published Journal: International Journal of Membrane Science and Technology, Volume: 10, Issue: 1, Year: 2023

Request the full text from PASTIC

Keywords
Surface morphology, reduced graphene oxide, ball milling, Metal matrix composite
References
K.B. Plantier M.L.,Pantoya A.E.,Gash A.E. .2005 .Combustion wave speeds of nanocomposite Al/Fe2O3: the effects of Fe2O3 particle synthesis technique. Combust. Flame, 140 : 299-309.
Liu Y.,Gao B.,Qiao Z.,Hu Y.,Zheng W.,Zhang L.,Zhou Y.,G Y. .2015 .Gramscale synthesis of graphene quantum dots from single carbon atoms growth via energetic material deflagration, Chem. , 27 : 4319-4327.
Saboori A.,Moheimani S.,Pavese M.,Badini C.,Fino P. .2017 .New Nanocomposite Materials with Improved Mechanical Strength and Tailored Coefficient of Thermal Expansion for Electro-Packaging Applications. Metals (Basel), 7(536) : .
Tjong S. .2000 .Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng. R Reports, 29 : 49-113.
Liao Z. .2019 .State-of-the-art of surface integrity in machining of metal matrix composites. Int. J. Mach. Tools Manuf, 143 : 63-91.
Ma Z. .,Tjong S. .,Wang Z. .1999 .Cyclic and static creep behaviour of Al-Cu alloy composite reinforced with in-situ Al2O3 and TiB2 particulates. Mater. Sci. Eng. A 264, : 177-187.
Tjong S. .2000 .Abrasion resistance of stainless-steel composites reinforced with hard TiB2 particles. Compos. Sci. Technol, 60 : 1141-1146.
Bai G. .2019 .Tunable coefficient of thermal expansion of Cu-B/diamond composites preparedby gas pressure infiltration. J. Alloys Compd, 794 : 473-481.
Moghadam Dorri,A. Dorri .2014 .Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook. JOM 66, : 872-881.
SABOORI A.,CHEN X.,BADINI C.,FINO P.,PAVESE M. .2019 .Reactive spontaneous infiltration of Al-activated TiO2 by molten aluminium. Trans. Nonferrous Met. Soc. China, 29 : 657-666.
Salur E.,Aslan A.,Kuntoglu M.,Gunes A.,Sahin O. S. .2019 .Experimental study and analysis of machinability characteristics of metal matrix composites during drilling. Compos. Part B Eng, 166 : 401-413.
Liu L.,Li W.,Tang Y.,Shen B.,Hu W. Friction .2009 .and wear properties of short carbon fibre reinforced aluminium matrix composites. Wear, 266 : 733-738.
Moustafa S. .,El-Badry S. .,Sanad A. .,Kieback B. .2002 .Friction and wear of copper-graphite composites made with Cucoated and uncoated graphite powders. Wear, 253 : 699-710.
Li X.,Wang X.,Zhang L.,Lee S.,Dai H. .2008 .Chemically derived, ultrasmooth graphene nanoribbon semiconductors. Science, 319(5867) : 1229-1232.
Rafiee M. A.,Rafiee J.,Wang Z.,Song H.,Yu Z. Z.,Koratkar N. .2010 .Enhanced mechanical properties of nanocomposites at low graphene content. ACS nano, 4(12) : 7415-7420.
Wang G.,Shen X.,Wang B.,Yao J.,Park J. .2009 .Synthesis and characterisation of hydrophilic and organophilic graphene nanosheets. Carbon, 47(5) : 1359-1364.
Zhang H.,Yu X.,Braun P. V. .2010 .Three-dimensional bicontinuous ultrafast-chargeand-discharge bulk battery electrodes. Nature Nanotechnology, 6(5) : 277-281.
Zheng R,Hao X,Yuan Y,Wang Z,Ameyama K,Ma C .2013 .Effect of high volume fraction of B4C particles on the microstructure and mechanical properties of aluminum alloy based composites. J Alloy Comp, 04 : 291-298.
Rashad M,Pan F,Tang A,Asif M .2014 .Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method. Prog Nat Sci Mater Int, 03 : 101-108.
Archard JF .1953 .Contact and rubbing of flat surfaces. J Appl Phys, 24 : 981-988.
Sekhar R,Singh TP .2014 .Mechanisms in turning of metal matrix composites: a review. J Mater Res Technol, 10 : 197-207.
Zhang C,Yao D,Yin J,Zuo K,Xia Y,Liang H,Zeng Y .2019 .Effects of β-Si3N4 whiskers addition on mechanical properties and tribological behaviors of Al matrix composites. Wear, 05 : 145-156.
Liu ZY,Wang QZ,Xiao BL,Ma ZY .2010 .Clustering model on the tensile strength of PM processed SiCp/Al composites. sites a, 08 : 1686-1692.
Bastwros MH,Esawi AMK,Wifi A .2013 .Friction and wear behaviour of Al-CNTcomposites. Wear, 08 : 164-173.
0

Citations

0

Downloads

61

Views