No Detail Found!

Selective Recovery (LiNiCoAlO2) Powder of Lithium Hydroxide from Spent NCA

Author(s)
Jei-Pil Wang Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
Taeyi Kang Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
Taejun Jeon Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
Gyudong Ryu Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
Abstract
This research was conducted on the method of recovering the lithium hydroxide and valuable metal from the NCA-based cathode active materials in the spent lithium-ion batteries. The recovery rate of lithium depends on the reaction temperature, retention time, reaction time during H2 reduction and solid-liquid ratio. Lithium hydroxide and valuable metals were recovered under each experimental condition, and the following optimal process conditions were determined based on the results of experiment. Based on the charging of 10g of NCA powder, the optimal process conditions were determined as follows: the reaction temperature of 700?; the retention time of 3hrs; and the H2 gas flowrate of 300cc/min; the leaching time of 1hr for water leaching; the solid-liquid ratio of the sample and distilled water at 1:30; the stirring speed of 300rpm at room temperature, and the recovery rate of 92.30% was achieved.
Publication Details
Page(s) 106-111
DOI DOI not available
Published Journal: International Journal of Membrane Science and Technology, Volume: 11, Issue: 1, Year: 2024

Request the full text from PASTIC

Keywords
hydroxide, Active Cathode Material, NCA(LiNiCoAlO2), Lithium ion Battery, LiOH
References
Huang Zhu .2022 .Hydrogen reduction of spent lithium-ion battery cathode material for metal recovery: Mechanism and kinetics. ” Frontiers in Chemistry, 10 : 1019493.
Park H. K. .2008 .. The Research and Development Trend of Cathode Materials in Lithium-Ion Batteries, Journal of the Korean Electrochemical Society, 11(3) : 197-210.
Kim S.Y.,Choi S.H.,Lee E.J.,Kim J.S. .2017 .Synthesis and electrochemical performance of Ni-rich NCM cathode materials for lithium-ion batteries”. J. Electrochem. Soc, 20 : 67.
Li ,Li .2011 ."Preparation of LiCoO2 films from spent lithium-ion batteries by a combined recycling process. " Hydrometallurgy 108.3, : 220-225.
Kang ,Jingu .2010 ."Recovery of cobalt sulfate from spent lithium ion batteries by reductive leaching and solvent extraction with Cyanex 272.". Hydrometallurgy 100.3, : 168-171.
Yang-kook Sun . .A novel cathode material with a concentration‐gradient for high‐energy and safe lithium‐ion batteries. ” Advanced Functional Materials, 20(3) : 485-491.
Zeng X.,Li J.,Singh N. .2014 .Recycling of Spent Lithium-Ion Battery: A Critical Review. Critical Reviews in Environmental Science and Technology, 44(10) : 1129-1165.
Pingwei .1998 ."Hydrometallurgical process for recovery of metal values from spent lithium-ion secondary batteries. " Hydrometallurgy 47.2, : 259-271.
Moon J. H. .2013 .Cobalt recovery from spent lithium-ion battery and recycling of active cathode material. , 03722 : .
Song X.,Hu T.,Liang C. .2017 .Direct regeneration of cathode materials from spent lithium iron phosphate batteries using a solid phase sintering method. RSC Advances, 7(8) : 4783-4790.
Whittingham M. S. .2004 .Lithium batteries and cathode materials. Chemical reviews, 104 : 4271-4302.
Kim K. J. .2008 .Recovery of lithium hydroxide from spent lithium carbonate using crystallizations. Separation Science and Technology, 43(2) : 420-430.
Joo S. Y.,Shim H. W.,Choi J. J. .2020 .A Method of Synthesizing Lithium Hydroxide Nanoparticles Using Lithium Sulfate from 110. , : .
0

Citations

0

Downloads

65

Views