No Detail Found!

Fabrication of Inventive utilizing Poly-Ethylene Stabilization Techniques Hybrid Environmental Terephthalate (PET) Bricks (HEB) by Advanced

Author(s)
Muhammad Qamer State Key Laboratory of Hydraulic Engineering, Simulation, and Safety, Tianjin University, Tianjin, China.
Altaf ur Rahman Sarhad University of Science and Information Technology,Peshawar,Pakistan
Saad Zaheer Centre of Excellence in Water Resources Engineering, University of Engineering and Technology (UET), Lahore, Pakistan; Civil Engineering Department, Bahauddin Zakariya University, Multan, Pakistan
Nasir Mumtaz The University of Haripur,Haripur,Pakistan
Rimsha Saddique Superior University,Lahore,Pakistan
Muhammad Haroon Iqra National University,Peshawar,Pakistan
Abstract
Sand brick, also known as cement brick or sand brick constructed from sand and cement, is a typical brick used in the building industry. Due to concerns about ecological problems, particularly the scarcity of natural sand and plastic issues, the demand for sand increased due to the consumption of sand cement brick. Thus, research into possible alternatives to natural sand is needed. In this work, plastics were utilized in place of sand to create sand cement bricks with grades of 5 N/mm2 and 10 N/mm2, which are known as hybrid environmental bricks (HEB). This research identified and discussed the impact of plastic on the compressive strength and density of brick made of plastic as opposed to river sand. Three layers of HEB are cast using two distinct strength ratings and various components. The HEB created using this concept yielded brick distinct from regular sand-cement brick. This study recognized and provided all of the important characteristics of HEB. The ideal combination for HEB was then identified by the study of this comparison. The results demonstrated that the approved brick by the characteristics analysis was the best combination for this investigation. According to the results, plastic has a great deal of promise for usage as a material to substitute sand when making sand cement bricks. Although the plastic-containing sand cement has a decreased compressive strength, its other qualities are still sufficient for industrial application. Ultimately, it can be said that the HEB has the potential to become a novel brick type in the building sector as it requires less sand and cement to make high-quality bricks that meet specifications.
Publication Details
Page(s) 721-729
Published Journal: International Journal of Membrane Science and Technology, Volume: 11, Issue: 1, Year: 2024

Request the full text from PASTIC

Keywords
plastic, Cement, Hybrid Environmental Bricks (HEB), Sand bricks, Poly-Ethylene Terephthalate
References
Das S.,Lee S. H.,Kumar P.,Kim K. H.,Lee S. S.,Bhattacharya S. S. .2019 .Solid waste management: Scope and the challenge of sustainability. Journal of cleaner production, 228 : 658-678.
Rajmohan K. V. S.,Ramya C.,Viswanathan M. R.,Varjani S. .2019 .Plastic pollutants: effective waste management for pollution control and abatement. Current Opinion in Environmental Science & Health, 12 : 72-84.
Fořt J.,Černý R. .2020 .Transition to circular economy in the construction industry: Environmental aspects of waste brick recycling scenarios. Waste Management, 118 : 510-520.
Brauer R. L. .2022 .Safety and health for engineers. , : .
Cheong L. Q. L. .2020 .Preliminary Study On Lightweight Interlocking Block Design (Doctoral dissertation. , : .
Shakir A. A.,Ibrahim M. W.,Othman N. H.,Mohammed A. A.,Burhanudin M. K. .2020 .Production of eco-friendly hybrid blocks. Construction and Building Materials, 257 : 119536.
Yaseen N.,Hassan M.,Saeed A. U. R.,Rizwan S. A.,Afzal M. .2022 .Sustainable development and performance assessment of clay-based geopolymer bricks incorporating fly ash and sugarcane bagasse ash. Journal of Materials in Civil Engineering, 34(4) : 04022036.
Simão F. V.,Chambart H.,Vandemeulebroeke L.,Nielsen P.,Adrianto L. R.,Pfister S.,Cappuyns V. .2022 .Mine waste as a sustainable resource for facing bricks. Journal of Cleaner Production, 368 : 133118.
Vieira C. M. F.,Carvalho J. P. R. G. .2016 .Recycling of Granite Waste from Sawing Operation in Clay Brick for Civil Construction. Journal of Solid Waste Technology & Management, 42(1) : .
Goel G.,Kalamdhad A. S. .2017 .Degraded municipal solid waste as partial substitute for manufacturing fired bricks. Construction and building materials, 155 : 259-266.
Chen H.,Cui Y.,H. Y.,Hu W.,Mao L.,L. L. .2022 .Effects of electric arc furnace slag on promoting quality and environmental safety of fired bricks incorporating municipal solid waste incineration fly ash. Construction and Building Materials, 345 : 128327.
Hossiney N.,Das P.,Mohan M. K.,George J. .2018 .In-plant production of bricks containing waste foundry sand-A study with Belgaum foundry industry. Case studies in construction materials, 9 : e00170.
Hahladakis J. N.,Iacovidou E. .2018 .Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?. Science of the Total Environment, 630 : 1394-1400.
Ghosh A.,Manna M. C.,Jha S.,Singh A. K.,Misra S.,Srivastava R. C.,Singh A. K. .2022 .Impact of soil-water contaminants on tropical agriculture, animal and societal environment. Advances in Agronomy, 176 : 209-274.
da Silva A. R. G.,Cecchin D.,Marvila M. T.,Amran M.,Fediuk R.,Szelag M. .2021 .Application of plastic wastes in construction materials: A review using the concept of life-cycle assessment in the context of recent research for future perspectives. Materials, 14(13) : 3549.
Adiyanto O.,Mohamad E.,Abd Razak J. .2022 .Systematic review of plastic waste as eco-friendly aggregate for sustainable construction. International Journal of Sustainable Construction Engineering and Technology, 13(2) : 243-257.
Saikia N.,De Brito J. .2014 .Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Construction and building materials, 52 : 236-244.
Ali S. S.,Elsamahy T.,Koutra E.,Kornaros M.,El-Sheekh M.,Abdelkarim E. A.,Sun J. .2021 .Degradation of conventional plastic wastes in the environment: A review on current status of knowledge and future perspectives of disposal. Science of the Total Environment, 771 : 144719.
Akhtar N.,Zada U.,Soomro A. A.,Arif M.,Saad M.,Ullah R. .2024 .Investigating the Influence of Trashed Polymeric Compounds (TPC) on the Mechanical Properties, XRD Pattern and Microstructure of the Brick. Journal of ICT, : 1-10.
Ali S. S.,Elsamahy T.,Koutra E.,Kornaros M.,El-Sheekh M.,Abdelkarim E. A.,Sun J. .2021 .Degradation of conventional plastic wastes in the environment: A review on current status of knowledge and future perspectives of disposal. Science of the Total Environment, 771 : 144719.
Saikia N.,De Brito J. .2014 .Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Construction and building materials, 52 : 236-244.
0

Citations

0

Downloads

74

Views