Polyallydiglycol carbonate (CR-39) nuclear track detectors were pre-irradiated with Am-241 to produce the latent tracks of alpha particles. In order to investigate the changes occurred in the original morphology of the latent tracks, these pre-irradiated detectors before etching were exposed to integrated sunlight radiation in different durations of the day. After solar exposure the samples were etched in 6 M NaoH at 70Co for 3 hours. The results indicate that the average diameter of the track increases under sunlight exposures, whereas no changes were observed in the detectors exposed at night and also in solar unexposed samples. It was further noted that the increase was significant under higher intensity of the solar radiation. The results can best be explained by an increase in the bulk etch velocity of the detector caused by sunlight exposure. The mechanism for this is perhaps damage to molecular chains resulting from the sunlight illumination in this detector. It is believed that the higher intensity irradiance may degrade the detector and thus it loses its ability to act anymore as a detector.