No Detail Found!

Used cylinder oil modified cold-mix asphalt concrete.

Author(s)
Muhamad Nazri Borhan Department of Civil and Structure Engineering, Faculty of Engineering, National University of Malaysia, Selangor, Malaysia
Fatihah Suja Department of Civil and Structure Engineering, Faculty of Engineering, National University of Malaysia, Selangor, Malaysia
Amiruddin Ismail Department of Civil and Structure Engineering, Faculty of Engineering, National University of Malaysia, Selangor, Malaysia
Riza Atiq O. K. Rahmat Department of Civil and Structure Engineering, Faculty of Engineering, National University of Malaysia, Selangor, Malaysia
Abstract
The purpose of this study is to evaluate mechanical properties of control and modified asphalt mixtures. The modified asphalt mixtures were studied on cold-mix asphalt. Used Cylinder Oil (UCO) was used as a modifier in this study. The modification efficiency was evaluated by the improvement in the performance of prepared asphalt concrete mixes. Physical analysis of the UCO was then performed. Asphalt concrete mixes having different percentages of UCO (0, 20, 25 and 30%) as a modifier were prepared. These samples were characterized using the Marshall Stability, indirect tension test, static creep and dynamic creep test. As a result, the addition of oil to the asphalt has reduced the solvency of maltenes. The higher the added percentages of oil are seen, the softer the asphalt-UCO binders happen. It is believed that the higher the percentages of the UCO were existed, the lower the ability of the mixes to resist deformation occurred.
Publication Details
Page(s) 3485-3491
DOI DOI not available
Published Journal: Journal of Applied Sciences, Volume: 7, Issue: 22, Year: 2007

Request the full text from PASTIC

0

Citations

0

Downloads

60

Views