No Detail Found!

Preparation and Catalytic Performance of the Copper-Manganese-Silicon Catalysts for Dehydrogenation Reaction of 2-butanol

Author(s)
Li Zhang School of Chemical Engineer, Shenyang University of Chemical Technology,Shenyang Liaoning,China
ChaoQun Chen School of Chemical Engineer, Shenyang University of Chemical Technology,Shenyang Liaoning,China
XingTong Li School of Chemical Engineer, Shenyang University of Chemical Technology,Shenyang Liaoning,China
Ying Zhang School of Chemical Engineer, Shenyang University of Chemical Technology,Shenyang Liaoning,China
Abstract
Summary: Cu-Mn-Si catalysts with copper-manganese oxides as the main constituents and silica dioxide as the supports were prepared by co-precipitation method. The performance of the catalysts for the dehydrogenation reaction of the 2-butanol to methyl ethyl ketone was tested. The effects of Cu and Mn ratios on the catalytic performance were investigated. The catalysts were characterized by XRD, SEM, H2-TPR, TG, BET and XPS, to reveal the catalytic mechanism. The results showed that after adding the manganese, the copper-manganese complexes were formed in the catalysts, which effectively improved the activity of the catalysts. XRD results showed that a new phase of Cu -Mn complex was formed in the fresh catalysts, and reduced copper species appeared in the spent catalysts; TPR results showed that the reduction temperature of the catalysts could be reduced by adding appropriate amount of manganese; XPS results showed that the proportion of Cu++Cu0 can be increased in the fresh catalyst and that of Cu2+ in the spent catalyst can be decreased after the addition of manganese. When the mole ratio of Cu, Mn and Si in the catalysts was 0.8:0.2:1, the conversion of 2-butanol could reach 94.9%, and the selectivity of methyl ethyl ketone was 98%.
Publication Details
Page(s) 18-28
Published Journal: Journal of Chemical Society of Pakistan, Volume: 46, Issue: 1, Year: 2024

Request the full text from PASTIC

Keywords
Co-Precipitation Method, Methyl ethyl ketone, Dehydrogenation, 2-butanol, Cu-Mn-Si catalyst
References
Liu Z.H.,Huo W.Z.,Ma H. .2006 .Development and commercial application of methyl-ethyl-ketone production technology. J. Chin. J. Chem, 14(5) : .
Geravand E.,Shariatinia Z.,Yaripour F. .2015 .Synthesis of copper-silica nanosized catalysts for 2-butanol dehydrogenation and optimization of preparation parameters by response surface method. J. Chem. Eng. Res. Des., 96(10) : .
Marchi A.J.,Fieero J.L.G.,Santamaria J. .1996 .Dehydrogenation of isopropanol alcohol on a Cu/SiO2 catalyst: a study of the activity evolution and reactivation of the catalyst. J. Apple. Catal. A., 142(10) : .
Yang H.H.,Chen Y.Y.,Cui X.J. .2018 .A highly stable copper-based catalyst for clarifying the catalytic roles of Cu0 and Cu+ species in methanol dehydrogenation. J. Angew. Chem, 57(7) : .
Li M.S.,Hao Y.F.,C.-L. Fernando Y.F. .2015 .Hydrogen-Free”hydrogenation of nitrobenzene over Cu/SiO2 via coupling with 2-butanol dehydrogenation. J. Top. Catal., 58(4) : .
Wang B.,Jin M.M.,An H. .2020 .Hydrogenation performance of acetophenone to 1-phenylethanol on high active nano Cu/SiO2 catalyst. , 150(1) : .
Thomas D. J.,Wehrli J. T.,Wainwright M. S. .1992 .Hydrogenolysis of diethyl oxalate over copperbased catalysts. J. Apple. Catal. A., 86(2) : .
J. Wu Y.M.,Shen C.H.,Liu C.H. .2005 .Vapor phase hydrogenation of furfural to alcohol over environmentally friendly Cu-Ca/SiO2 catalyst. J. Catal. Commu., 6, (6) : .
Shen W.,Pan C.,Yang X.Y. .2008 .-butanediol with maleic anhydride over CrCu/SiO2 catalysts. J. Acta Chim, 66(11) : .
Tu Y.J.,Chen Y.W. .1998 .Effects of alkaline-earth oxide additives on silica-supported copper catalysts in ethanol dehydrogenation. J. Ind. Eng. Chem. Res., 37(1) : .
C. Deborah A.P.,Carlos and M.M.S. Vera A.P. .1999 .Stability and selectivity of bimetallic Cu-Co/SiO2 catalysts for cyclohexanol dehydrogenation. J. Apple. Catal. A., 176(2) : .
D.H. Ji W.C.,Zhu Z.L.,Wang Z.L. .2007 .Dehydrogenation of cyclohexanol on CuZnO/SiO2 catalysts: the role of copper species. J. Catal. Commun., 8(12) : .
Feckensten T.,Pohl J.,Carduck F.J. .1989 .Process for the hydrogenation of fatty acid methyl esters in a pressure range of 20 to 100 bars. , (PatentEP0300346B1) : .
Danny E.K.,Poels A.,Bliek A. .1999 .Ester hydrogenolysis over promoted Cu/SiO2 catalysts. J. Apple. Catal. A., 184(2) : .
G.C. Chinchen K.C.,Waugh D.A.,Whand D.A. .1986 .The activity and state of the copper surface in methanol synthesis catalysts. J. Appl. Catal., 25(2) : .
Zhang Y.,Ye C.L.,Guo C.L. .2018 .-modified Cu/SiO2 as an active and stable catalyst for the hydrogenation of methyl acetate to ethanol. , 39(1) : .
Decky P.,Wieckowski A. B.,Najderkozdrowska L. .2017 .EPR study of dealuminated HY zeolite and silica containing Cu-Mn-Zn spinels: the effect of support. J. Acta Phys. Pol. A., 132(1) : .
J.H. Li A.R.,Mao W.,Yao W. .2022 .Iridium supported on porous polypyridine-oxadiazole as highactivity and recyclable catalyst for the borrowing hydrogen reaction. J. Green Chem, 24(2602) : .
J.H. Li M.,Yu Z.C.,Duan Z.C. .2021 .Porous crosslinked polymer copper and iridium catalyzed the synthesis of quinoxalines and functionalized ketones under solvent-free conditions. J. Mater. Chem, 42(190) : .
Nisar J.,Shah A. .2019 .Thermo-catalytic decomposition of polystryrene waste: Comparative analysis using different kinetic models. J. Waste Manage. Res., 38(2) : .
J.H. Li Y.K.,Yang W.K.,Hu W.K. .2022 .Catalytic synthesis of pyrazine and ketone derivatives by unsymmetrical triazolyl-naphthyridinyl-pyridine copper. J. Chin.J.Org.Chem, 42(190) : .
J.H. Li H.Q.,Liu H.Y.,Zhu H.Y. .2021 .Highly efficient and recyclable porous organic polymer supported iridium catalysts for dehydrogenation and borrowing hydrogen reactions in water. J. ChemCatChem., 5(7861) : .
J.H. Li H.Q.,Liu B. Zhang,,Org J. Chin.J. .2022 .Synthesis of supported indazolyl-pyridyl-quinoline iridium catalyst and its application to N-Alkylation of 2- aminobenzothiazoles. , 42(619) : .
0

Citations

0

Downloads

73

Views