No Detail Found!

Optimal design of a subsurface pipe drainage system.

Author(s)
Muhammad Iqbal College of Agriculture, D.G. Khan Sub Campus, University of Agriculture, Faisalabad, Pakistan
Matlob Ahmad College of Agriculture, D.G. Khan Sub Campus, University of Agriculture, Faisalabad, Pakistan
Inamullah Faculty of Agricultural Engineering and Technology, University of Agriculture, Faisalabad, Pakistan
Manzoor Ahmad Faculty of Agricultural Engineering and Technology, University of Agriculture, Faisalabad, Pakistan
Abstract
An optimization model consisting of minimization of total cost of a pipe drainage system subject to constraints on design variables was formulated. Data from Mardan SCARP was used as input to the optimization model. The output was obtained in the form of various combinations of design variables with total cost. The optimal values for lateral depth, spacing, diameter and length were found to be 1.60 m, 66.7 m, 9.20 cm and 250 m, respectively which resulted in a total of 60 laterals and 2 collectors for an area of 100 ha. Collector diameter and length respectively were 25.0 cm and 1000 m with a minimum cost of Rs.28152/ha. As expected the laterals were of the smallest size i.e., 9.20 cm to keep the total cost minimum. The optimization procedure was also used to identify the nearly-optimal designs. The cost of nearly-optimal designs being close to the minimum cost showed these designs equally good which shows the flexibility of the procedure to find out number of equally feasible designs.
Publication Details
Page(s) 159-163
DOI DOI not available
Published Journal: Pakistan Journal of Agricultural Sciences, Volume: 44, Issue: 1, Year: 2007

Request the full text from PASTIC

0

Citations

0

Downloads

37

Views