Physico-chemical and microbiological pollutants may compromise quality of drinking water. The current study aims at highlighting various physico-chemical and microbial parameters of drinking water samples collected from centralized water storage reservoirs of National University. Major water quality parameters which were examined in this study include pH, Electrical conductivity (EC), Turbidity, Total suspended solids (TSS), Total dissolved solids (TDS), Dissolved oxygen (DO), Residual chlorine, Hardness, Alkalinity. Moreover, microbial analysis of water samples was also carried out through Most Probable Number technique (MPN). Results indicate that all the physico-chemical parameters were within prescribed limits of World Health Organization and Pakistan Drinking Water Quality Standards (WHO/PDWQS) in both underground and overhead water storage reservoirs except DO (9.05-9.2 and 9.05-9.1 mg/L ), TSS (10-20 and 3.3-10 mg/L) and residual chlorine (0.08-0.14 and 0.19-0.28 mg/L), respectively. The MPN index values for both underground and overhead water storage reservoirs range between 16->23 and 1.1-12, respectively, which illustrates high microbial contamination in water due to low detection ofresidual chlorine. The results highlight that water from centralized water storage reservoirs of National Universityis unfit for drinking purposes. Statistical analysis such as paired t-test also reveals that water quality parametersfrom underground and overhead storage reservoirs are not significantly different from each other except EC andTDS having P values <0.05. It is necessary to safeguard water quality in water storage reservoirs by regularinspections and chemical cleaning of water storage reservoirs otherwise it will cause serious threats to well-beingof the community.